Your Source for All Things Drts!

How to Set Up a Dartboard?

Author:

Published:

Updated:

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The popular game of darts may be played in the convenience of your own home with the help of a dartboard. The dart board set up requires attention to detail regardless of whether it will be used in a house, bar or leisure center.

With an understanding of the importance of factors like placement, height, throwing line, and mounting, you can make the most of your darts experience. So that you can have your dartboard ready to go and start scoring some points, let’s break it down step by step.

how to set up a dartboard

Safety Considerations

It’s important to put safety first while putting up a dartboard so that nobody gets hurt. Here are a few crucial safety tips to remember:

Adequate Space

It’s important to have adequate room around the dartboard so that players may stand easily. To prevent injuries, remove any potential trip hazards, such as debris or fragile objects.

Wall Protection

Protect your walls from errant darts by installing a dartboard surround or buying a dartboard cabinet. These extras are designed to deflect darts and protect the space around you from harm.

Lighting

The dartboard and darts need to be well-lit so that they can be seen clearly. Light up the area so that players won’t be bothered by shadows or glare while trying to aim.

dartboard cabinet

Flooring

Pick flooring that can take the pounding from dropped darts. Darts and floors alike may benefit from the usage of carpets or rubber mats.

Dart Maintenance

Always check your darts for signs of wear and damage. The danger of damage from a dart is greatly reduced when the tip is sharp and well-maintained.

Player Etiquette

Instill in your athletes a sense of sportsmanship and accountability. Tell them to pay attention, stay focused, and wait their turn before approaching the throwing line.

Equipment Needed

You’ll need the following items to put up a dartboard:

Dartboard

Pick a dartboard that’s well-made out of sisal fibers or something comparable. A dartboard with a diameter of 18 inches (45.72 cm) is considered conventional.

Mounting Surface

Find a good wall or other flat surface to install the dartboard on. A dartboard may be mounted on a wall, in a dartboard cabinet, or on a dartboard stand.

Mounting Bracket

Mount the dartboard to your desired surface using a strong and stable mounting bracket. The dartboard bracket has to be strong enough to support the board and absorb the force of the darts.

Measuring Tape

The dartboard and the throwing line need to be placed precisely, therefore a measuring tape will come in handy for this.

Level

Use a level to verify the dartboard is hung at the proper height and level.

sisal fibers

Screwdriver or Drill

A screwdriver or a drill may be required to install the dartboard, depending on the mounting bracket and the surface.

Dartboard Surround or Cabinet (Optional)

A dartboard surround or cabinet may serve as both wall protection and ornamental focal point. Darts and other dart accessories may be stored in these accessories.

Lighting (Optional)

The dartboard must be well-lit so that players can see their shots. For the best illumination, utilize either overhead lighting or dartboard-specific lighting fixtures.

How to Set Up a Dartboard

The wall should be large enough

Location of the Dartboard

You should think about the following things while deciding where to put your dartboard:

Wall Position

Find a smooth, uncluttered wall to work on. The dartboard needs a big enough area on the wall to function properly.

Adequate Lighting

Pick a well-lit area so that both the dartboard and the darts can be seen easily. When the players’ accuracy might be affected by heavy light or shadows, try to avoid such spots.

Player Comfort

Players will need space to stand and throw darts without feeling crowded. Keep in mind the players’ stature and reach to ensure that they have enough room to freely move their arms.

Safety

Find a spot where mishaps are unlikely to occur. Avoid accidents by placing the dartboard in a secure, out-of-the-way location away from breakables, valuables, and heavy traffic.

Distractions

To maintain a concentrated playing atmosphere, it’s best to stay away from places with plenty of background noise or frequent interruptions. Find a quiet place where everyone can focus on the game.

Accessibility

Think about how convenient the dartboard’s position is. Make sure that people of varying physical abilities may participate without difficulty.

Measuring the Distance

It’s important to get the distance right when installing a dartboard. To correctly position the throwing line, do as follows:

Standard Measurements

The standard oche, or throwing distance, is 7 feet 9.25 inches (2.37 meters) horizontally from the dartboard’s face to the throwing line.

Alternative Method

There is an alternate technique called “diagonal measurement” that may be utilized if you don’t have enough room to measure the whole throwing distance. Take a reading from the center of the target down to the floor at a distance of 9 feet, 7.5 inches (2.93 meters). From this point, a distance of 0.76 meters (2 feet, 6 inches) back to the dartboard should be calculated. This will give you a rough idea of where to aim your throw.

throwing line

Consistent Floor Height

Make sure the specified throwing line is flush with the playing surface. To keep things even, it shouldn’t be slanted any way.

Optional

You may indicate extra distances for other game modes or player preferences to improve the overall playing experience. For more relaxed games, some players may choose for a lower throwing distance.

Marking the Throwing Line

Follow these procedures to clearly indicate the dartboard’s throwing line:

Gather the necessary materials

A ruler or tape measure, as well as some masking tape and a pen, will come in handy.

Measure the standard throwing distance

The standard oche, or throwing distance, is 7 feet 9.25 inches (2.37 meters) horizontally from the dartboard’s face to the throwing line.

Find the correct position

From the dartboard’s front, take a horizontal measurement of the required length. Write these coordinates on the ground or the floor.

Ensure accuracy

Get out a ruler or measuring tape and make sure you’re at the correct distance from the dartboard. Check that the distance between the target and the drawn line for throwing is consistent with the accepted norm.

Mark the throwing line

After determining the proper spot, draw a line on the ground or the floor using masking tape or a marker. The line should be straight and easily visible so that players know where to stand while throwing darts.

Mounting the Dartboard

The dartboard should be hung up next. Make sure the dartboard is perfectly vertical by using a level. A mounting bracket is often included with a dartboard. Install the bracket by screwing it to the wall. Mount the dartboard to the wall by first attaching the bracket to the wall.

Securing the Dartboard

When the dartboard is in place, be sure to lock it down. Mount the dartboard on the wall using the included screws. Check that the dartboard is secure and at the proper height.

Testing the Dartboard

The dartboard should be tested once it has been installed. Make sure the dartboard is stable and level before you start playing. Next, you may check how well it works by tossing a dart from the designated area. You know you have your dartboard properly mounted if the dart you throw at it remains in position when it strikes the board.

How is a Dart Board Organized?

A dart board is typically organized as follows:

  • The board is circular and divided into 20 numbered sections, arranged in a clockwise order from 1 to 20.
  • The numbers 1 to 20 are arranged within wedge-shaped sections that radiate out from the center of the board.
  • The center of the board contains the inner bullseye, which is a small circular area surrounded by a metal ring. This inner bullseye is worth 50 points.
  • Surrounding the inner bullseye is the outer bullseye, which is the narrow green ring around the inner bullseye. The outer bullseye is worth 25 points.
  • The outermost ring of the board is divided into wedge-shaped double and triple sections. The double sections are the thinner wedges and are worth double the numbered section’s points. The triple sections are the wider wedges and are worth triple the numbered section’s points.
  • The double and triple sections are arranged in an alternating pattern around the circumference of the board.
  • There is an upper half and a lower half to the board. The upper half contains the numbers 20, 1, 18, 4, 13, 6, 10, 15, 2, 17, 3, 19. The lower half contains 11, 12, 14, 9, 8, 16, 7, 5.
  • The center point of the board, known as the bullseye, is located directly underneath the 20 sections in the upper half of the dartboard.

What are Common Mistakes to Avoid During a Dart Board Set Up?

Here are some common mistakes to avoid when setting up a dartboard:

  • Mounting the board too low. The target should be placed 1.73 meters (5 feet) above the ground. If it’s set too low, darts may bounce off the board.
  • Mounting the board on an unstable surface. Choose a wall or door that doesn’t vibrate or move when darts hit it. Avoid hollow doors or walls.
  • Putting the board too close to sidewalls. Leave at least 2 feet of clearance on either side of the board to allow throwers adequate space.
  • Using poor lighting. Position lights to brightly illuminate the board, avoiding shadows or glare on the board’s surface.
  • Forgetting the toe line. Mark a line 7 ft 9.25 in (2.37 m) from the board for the thrower’s toe position.
  • Not using a protector. Use a dartboard protector to catch bounce outs and protect the wall.
  • Mounting it crooked. Use a level to ensure the board is perfectly vertical.
  • Not securing it well. Use provided hardware and anchors for a secure mounting.
  • Ignoring board orientation. Place the 20 wedges at the top center, not at the bottom.
  • Allowing objects near the board. Keep the throw area clear of chairs, tables, etc. that can obstruct throws.
  • Mounting it on an outside wall. Outdoor boards require weather-resistant boards and lighting.

Following dartboard dimensions and setup guidelines carefully helps create a professional throwing environment.

Is There a Standard Regulation for Dart Board Set Up?

Yes, there are official standards and regulations for setting up a regulation dartboard according to professional tournament guidelines. Here are some of the key standards:

  • Height – A minimum height of 5 feet, 8 inches (1.73 meters) is required for the target.
  • Throw Line Distance – The horizontal distance between the oche (throw line) and the dartboard face must be 7 feet, 9.25 inches (2.37 meters).
  • Board Position – The dartboard should be secured vertically and the 20 wedge must be at the top center of the board.
  • Lighting – The board must be evenly illuminated and lit to a minimum of 100 lux intensity. No shadows or bright spots should fall on the board surface.
  • Clear Space – There should be at least 2 feet of clear space on all sides of the board with 7 feet of clear ceiling height above the board.
  • Toe Line – A removable tape line should mark the oche throw line. Players must stand with both feet behind the line during a turn.
  • Dartboard Wire – The wire spider of the dartboard must not excessively obstruct darts from sticking. Old boards with bent wires should be replaced.
  • Scoring – Standard scoring applies with doubles and triples rings properly aligned with their intended wedges.
  • Fastening – Dartboards must be firmly secured and not move, vibrate or bounce upon dart impact.
  • Outdoor – Outdoor boards need brighter lighting (250 lux minimum) and weather resistant materials.

These standards are set by the World Darts Federation and must be precisely followed for sanctioned tournaments like the PDC World Championships.

Faq

Can I mount the dartboard on a door?

A door may not be a sturdy enough surface to install a dartboard on, therefore that option is not suggested. You should think about putting it on the wall or putting it in a dartboard cabinet.

How can I protect my walls from stray darts?

The dartboard surround is a foam or rubber ring that encloses the dartboard and cushions the wall from darts. A dartboard cabinet is another option, since it serves as a wall protector and a place to store your darts and other equipment.

Can I adjust the height or throwing distance according to personal preference?

While these are the most generally used dimensions, they may be modified to suit individual tastes or game variants. When you want to play a fair game, make sure everyone agrees on the changes.

Is it necessary to have specific lighting for the dartboard area?

The dartboard and darts must be clearly visible, therefore good lighting is a must. You may use either general overhead lighting or specialized dartboard lighting equipment to create the ideal playing environment.

Conclusion

You may play darts anywhere you choose since putting up a dartboard is a simple operation. A successful and risk-free installation is guaranteed if the instructions in this manual are followed to the letter.

To begin the dart board set up, choose an area that can accommodate all of the participants and has sufficient lighting. Think about how to keep the players and the environment safe. Consider things like wall coverings, flooring, and player conduct to make the playing area safe.

The distance must then be measured precisely in order to establish where the throwing line should be set up. Make sure the throwing line you draw on the floor or ground is in accordance with the standard dimensions or your chosen variants.

You also read this article :- https://dartboardhub.com/how-to-win-darts-with-2-points-left/

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • How To Read Dart Board?

    How To Read Dart Board?

    Key Takeways: Reading a dart board is easy! It has numbers 1-20 in a circle. Each number has thin and thick areas. Hitting different areas scores different points. For instance, while playing a game with consecutive bulls, the thin outer ring gives you double points! The center, called the bullseye, scores the most. Ready to…

    Read more

  • Can A Dart Board Be Left Outside

    Can A Dart Board Be Left Outside

    Key Takeaways It may seem like a smart idea to leave your dart board outdoors, but there are a few things you should know before. In this article, I will look into the following: Traditional sisal (bristle) dartboards are not meant to be stored outdoors for long periods of time. Here’s why: Moisture is the…

    Read more

  • How To Restore Dart Board

    How To Restore Dart Board

    Key Takeaways: “Got a worn-out dartboard? No worries! First, using a damp cloth, clean off any surface dirt. Then, brush the curved surface gently with a wire brush. If it’s dry, sprinkle a little clean water. Let the dartboard dry flat. Hang it up again with a dartboard cover, and it’ll be like new!” In…

    Read more