Your Source for All Things Drts!

How to Hang a Dartboard Without the Bracket

Author:

Published:

Updated:

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Key Takeways:

  • First, find a place where you want your dartboard. Ensure it’s a spacious location without breakable items around.
  • Measure five feet and eight inches from the ground. This is the standard height for hanging a dartboard. Mark this spot, which will be the center of the dartboard.
  • Take the screw with high tensile strength. This will support the weight of the dartboard.
  • Take your strong string or thread and tie one end to the planter hook. Make sure the knot is tight and secure.

Introduction

Including a basic dartboard in your home is now more frequent, How to Hang a Dartboard Without the Bracket providing an enjoyable chance to improve your targeting skills and compete with buddies. Suppose you want to include an electronic dartboard in your setup but need the typical holder for dartboard mounts; what then? Don’t worry! Various methods exist to affix a dartboard without piercing openings or causing damage. If you’re not using steel tip dartboards but prefer a more contemporary design, this post will guide you on how to install dartboard mounting brackets without using the hanger.

Hang a dartboard without a bracket by using strong double-sided tape or Velcro strips on the back of the board. Make sure the wall is clean and dry. Press the dartboard firmly onto the wall. Check if it’s stable. Always be safe and ask for help if needed!

dart board mounting brackets

Things We Need to Hang a Dartboard Without the Bracket

Prior to starting, let’s confirm that we possess all the parts required to mount a dart board without a mounting device. Below is a piece of material you will need. Also, make sure to have a tape measure handy to determine the correct distance and proper height from the floor.

  • Dart board
  • Screw with a high tensile strength
  • Planter hook
  • String or thread that is strong
  • Hammer
  • Use a large drill bit if you want.
  • Level
  • Tape measure

What is a Dartboard?

A target for a game called darts is a round board divided into sections with numbers, where players aim to score points by throwing pointed objects like soft tip darts or steel tip darts into the sections. The average dart board has a width of 18 inches, nearly feet wide, and is composed of 20 congruent parts, each worth a unique score.

The outermost circle has a value of 25 points, while the next circles have a value of twice as much. The middle target is valued at 50 points, while the nearby area is worth 25 points. The boards used for playing darts are commonly made of either cork or plastic, typically hung at a distance of five feet and eight inches above the ground. They offer an interesting activity for people of every age while boosting manual dexterity and concentration.

What is a Dartboard Bracket

A dart board holder is a tool that permits fixing a dartboard to a vertical or horizontal surface. Brackets for dartboards are available in different types, such as brackets mounted on doors, walls, and ceilings. Every bracket is designed to fit a specific kind of dartboard and terrain.

dart board bracket

Dartboard brackets can simplify and strengthen the process of suspending a standard dartboard, preventing it from wobbling or falling down. Nevertheless, only some people possess or desire to utilize a dartboard attachment. More stability is needed for a heavy dartboard. Certain individuals may opt out of creating gaps in their walls or entranceways or require additional space. Various methods can mount a dartboard without a mounting bracket in these cases.

Types of dartboard brackets

Different types of dartboard brackets serve various purposes.

The wall bracket is a basic and widely used option, providing a simple attachment for securely mounting the dartboard at a desired height.

A rotating bracket allows for easy rotation, extending the dartboard’s lifespan by distributing wear and tear evenly.

Adjustable brackets offer flexibility, accommodating players of different heights with multiple mounting options.

Cabinet brackets are designed specifically for housing dartboards in cabinets, ensuring stability and secure mounting.

Backboard brackets, on the other hand, protect walls from stray darts and add a polished appearance to the dartboard setup.

How to Hang a Dartboard Without the Bracket Step-by-Step Guide

Putting up a dartboard without using the holder is surprisingly simple and only needs a few things you already own at home. With this technique, you can participate in dart games quickly!

Step Number 1:Find a suitable place for your dart board.

Pick a spot with ample space for throwing darts in a secure and cozy manner. To offer an appropriate area for playing, strive for at least 5 feet of breadth and 11 feet of distance. Do not put the dartboard throwing distance close to any fragile objects such as windows, doors, mirrors, or anything that could be damaged by stray darts. Once you have found the ideal spot, employ a device to identify a wooden beam within the wall. Mounting your dartboard onto a structural beam enhances firmness by backing up more mass and stopping the board from falling.

Hang a Dartboard Without the Bracket

Step Number 2 :Turn a screw into the dartboard.

Next, grab a power drill and drill a pilot hole into the marked spot on your wall. Be sure to use a bit that is slightly smaller than the screws you’ll be using to hang the dartboard. Once the pilot hole is drilled, insert your screws and tighten them until they are snug.

Drill a hole in a wall

Step 3: Pass a piece of thread through the screw.

A sturdy string or thin cord to the screw at the back of the dartboard. The twine needs to be sturdy to hold up the weight of the plank and stop it from slipping or breaking. Fasten one side of the cord firmly to the screw, ensuring the knot is strong and tight.

Deciding how long the string should be, consider the distance between the floor and the middle of the dartboard. The typical elevation of a dartboard is 5 feet and 8 inches. Include some additional length to make room for the bulk of the panel and the wall fastener. When selecting the appropriate measurement, trim the string and tie a circle on the opposite side. The circle should be large.

Now, Hang the Dartboard on the Wall

Step 4: Hang a hook on the wall.

It’s now time to secure a robust hook to the wall. Choose a hook such as planter hook, screws hook, metal hook and so on that can handle the weight of your dartboard and keep it from slipping off. Mark the location on the wall where you wish to hang the hook using a pencil. Check that it is parallel to the stud you indicated previously and is the same height as the string on your dartboard. To guarantee accuracy, use a level to check that the hook is parallel to the ground.

Make a hole in the designated area on the wall with a drill and a tiny bit of a hammer. The hole should be smaller in diameter than the hook.

Step 5: Suspend the dartboard from the hook.

Finally, hang your dartboard from the hook. Lift the dartboard and slip the string loop over the wall hook. Ascertain that the rope is not twisted or knotted and firmly holds the board in place. Check the dartboard’s levelness using a level and modify its location slightly left or right as needed until it is completely level.

Step back and appreciate your work after you’re pleased with the location. Congratulations! You successfully hung your dartboard without using a bracket.

How Do You Make a Dart Board Backer?

A dart board backer is a piece of material, usually either plywood or fiberboard, that is used to support a dart board. The backer helps to protect the wall behind the dartboard from errant darts and also provides a smooth surface for the darts to stick into. While you can purchase pre-made dart board backers, it is also fairly easy to make your own.

The most important thing to keep in mind when making a dart board backer is to use a material that is thick enough to stop a dart from penetrating all the way through. A thickness of 1/2 inch is generally sufficient.

Beyond that, the size and shape of the backer are up to you. Some people prefer to make square backers, while others like to cut them into circles or ovals. Once you have missed your backing to the desired shape and size, you can install it on the wall using screws or nails.

Just make sure that the screws or nails are not long enough to poke through the other side of the backer and into the wall itself. With a little bit of effort, you can easily make your dart board backer that will provide years of enjoyment.

Precautions to Take When Hanging a Dartboard Without a Bracket

While hanging a dartboard without a bracket might be a practical option, some care must be taken to maintain safety and prevent damage. Here are some precautions to take:

  • Always wear safety gloves and eyewear when drilling or hammering holes in walls or dartboards.
  • Before drilling or hammering, check for electrical cables or pipes behind the wall to avoid damage.
  • When hanging your dartboard, use a stud finder to locate a wooden stud in the wall for increased stability.
  • Make sure your dartboard is level and centered on the wall using a level.
  • Determine the gap and elevation between the starting point (oche) and the dartboard, typically 7 feet, 9.25 inches away.
  • Shield the wall from stray darts, and utilize a shield or support board positioned at the back of the dartboard.
  • Engaged in the activity, ensure that kids and animals are far from the zone of the board for throwing darts.
  • If you are not utilizing your darts, place them in a safe and protected location.

FAQ

How do Dartboard Mounting Brackets work?

Dartboard Mounting Brackets typically consist of a sturdy plate or frame that attaches to the wall, along with hooks or brackets that hold the dartboard. The bracket is mounted securely to the wall using screws or other fasteners, ensuring a stable platform for the dartboard.

What is the method for attaching a dartboard to brick?

You are fixing your dartboard to brick, and there are a couple of factors that you must keep in mind. The initial factor is the heaviness of the dart board. A weighty target board will need greater reinforcement compared to a lighter version. The next thing to consider is the kind of glue you use. A potent sticky substance is necessary for securing the dartboard firmly.

The third level pertains to how much water is present in the brick. If the brick is too wet, it may result in the glue not sticking properly. The fourth represents the dimension of the outside area of the rectangular block. A tiny space would need a more potent glue than a vast space.

Finally, it is essential to ensure no obstacles near the dartboard. Once you’ve pondered these things, select the appropriate glue and attach your dart board to the wall.

Can I purchase a Dartboard Mounting Bracket online from Home Depot?

You may get dartboard mounting brackets and other accessories from Home Depot’s online shop. You may easily place an order for a particular bracket by visiting their site and searching for it.

How can I safely remove the dartboard from the wall?

To protect the wall from wayward darts, use a dartboard protector or a backing board behind the dartboard. While playing, keep children and pets away from the dartboard area. Store your darts in a safe place when you are not using them.

How can I extend the life of my dartboard?

You may extend the life of your dartboard, there are several steps you can take. First, make it a habit to rotate the dartboard regularly, shifting it a few degrees clockwise or counterclockwise every few weeks. This helps distribute wear evenly across the board. Secondly, choose darts with soft-tip or steel-tip options that have sharp points.

This helps minimize severe damage to the dartboard, as sharp-tipped darts can eventually create holes and breaks. Additionally, it’s important to clean the dartboard regularly using a moist cloth or gentle brush to remove dust and dirt. Avoid using strong chemicals or solvents that may cause the board to deteriorate. Finally, protect the dartboard from direct sunlight, heat, and moisture, as these elements can cause the board to warp or fade. Keep the dartboard in a cool and dry place to ensure its longevity.

Final Thoughts

So there you have it! The steps you need to take to hang a dartboard without the bracket. We hope this article was helpful and that you are now able to enjoy some friendly competition with your friends or family members. Let us know how it goes!

You may also read – How to Sharpen Darts

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • How To Read Dart Board?

    How To Read Dart Board?

    Key Takeways: Reading a dart board is easy! It has numbers 1-20 in a circle. Each number has thin and thick areas. Hitting different areas scores different points. For instance, while playing a game with consecutive bulls, the thin outer ring gives you double points! The center, called the bullseye, scores the most. Ready to…

    Read more

  • Can A Dart Board Be Left Outside

    Can A Dart Board Be Left Outside

    Key Takeaways It may seem like a smart idea to leave your dart board outdoors, but there are a few things you should know before. In this article, I will look into the following: Traditional sisal (bristle) dartboards are not meant to be stored outdoors for long periods of time. Here’s why: Moisture is the…

    Read more

  • How To Restore Dart Board

    How To Restore Dart Board

    Key Takeaways: “Got a worn-out dartboard? No worries! First, using a damp cloth, clean off any surface dirt. Then, brush the curved surface gently with a wire brush. If it’s dry, sprinkle a little clean water. Let the dartboard dry flat. Hang it up again with a dartboard cover, and it’ll be like new!” In…

    Read more